Surplus Machine And Fabricating & Acreage Items
Timed Online Auction
Bidding Starts: Tuesday Nov. 28
Bidding Closes: Tuesday December 5 starting at 9am
Location:
Various Sites in Edmonton (Main) 5203 - 75 St.
Nisku and Sherwood Park
Preview:
Tuesday Nov. 28th 10am-5pm
& Monday Dec. 4 10am-5pm
Catalogue:
Coming Soon
This is a BidSpotter timed internet auction
REMOVAL SCHEDULE
NOTE: THERE IS NO ACCESS TO ANY LOCATIONS OTHER THAN PREVIEW DAY AT 75 STREET LOCATION
ALL OTHER VIEWING OR INSPECTION IS BY APPOINTMENT ONLY. NO EXCEPTIONS
Locations:
1- 7220 – 51 Avenue, BLDG #4 Edmonton, AB. Enter at main gate off 51 Avenue east of 75 street. Main auction site.
Removal from this site is by the 12th of December, Daily From 8:30 – 5:00, No removal Saturday or Sunday.
2- 53443 – Range Road 224, Sherwood Park, Acreage Items
Removal by Friday December 8, 4:00 PM
3- 6925 – 104 Street Edmonton Active Machine Shop
4- 7003 – 104 Street Edmonton Active CNC Machine Shop
5- 4905 – 72 Avenue Edmonton Active Machine Shop
6- 2103 – 8th Street Nisku, Active Machine Shop
7- 5830 – 92 Street, Edmonton. Active Machine Shop
Removal from the active Machine shops by Friday, December 15. Daily from 8:30 – 4:30, NO removal Saturday or Sunday.
Removal from active machine shops is by arrangement only. Arrangements will be made, with a coordinator at the location and the purchasers. Foothills will assist in these arrangements.
REMOVAL ONLY BY QUALIFIED RIGGERS - Recommended Riggers
Rusty’s Equipment Hauling, Doug 780-288-7770
Prime Movers & Rigging, Tye 587-894-4410
Hercules Rigging and Equipment Movers, Joe, 780-887-1952
Stanko Equipment, Yury 780-965-6202
Wire transfer Information:
Currency: CAD
Beneficiary: Foothills Equipment Liquidation Co. Ltd.
Contact Linda: 780-922-6090 or cell 780-721-5245
Reference: DEC 5TH TIMED ONLINE MACHNE & FABRICATING AUCTION. - For payment on Bidder # and name.
Lot 313 - video preview
Partial Catalogue
Vernon Model MPM4-460/SP CNC Pipe Profiling System, S/N 6280, Pipe Diameter 4” – 60”, Maximum weight per
ft. 1,500 lb., Maximum Total Weight 50,000 lb., Maximum Cutting Speed 200 IPM, Rotation Speeds 0 – 200 IPM,
Conveyor Rotation Speed up tp 50 RPM 4 Axis, Maximum Torch Travel 41 Ft., Maximum Torch Angle +/- 70
degrees with Oxy/Accet, used 2 years *
2007 Gildemeister CTX-620 Linear Lathe S/N 8040939559C
2006 Gildemeister NEF-600 Lathe S/N 0172000066A
500 Horsepower Detroit diesel powered Hydraulic Test Bench
2- New Lincoln STATIFLEX 6000-M High Volume Fume Extraction Systems
Ermak Model 2010, 6’ x 20’ Plasma cutting Table with Hypertherm Model HPR 260HD High Performance Plasma
Power Source And Ermak Model CNC Controller, Base Model EDL 260.20’ x 6’ *
Macobe Sub Arc System with L-tec 650CV Power source, Approx. 12’ Under Wire Feeder *
Aronson 40 Ton Pipe Rolls with Powered End and Idler * 60 Ton Pipe Rolls with Powered End and Idler * 50 Ton
Pipe Rolls with Powered End and Idler * 5 Ton Pipe Rolls with Powered End and Idler * Irco Model 7T-PRUT Pipe
Rolls with Powered End and Two Idlers * 2- 10 Ton Pipe Rolls with Powered End and Idler * 3 Pipe rolls from 10
Ton to 50 Ton drive Only *
Hyd-Mech T25A Horizontal Bandsaw with Autofeed * Hyd-Mech H-18A 18” x 18” Automatic bandsaw * Hyd-
Mech VW 18 Vertical Bandsaw * Gullco KBM-18-100-E Plate Beveller * Hyd-Mech Model V-18 Vertical Bandsaw
* Baxter Model 115B Tool Room Bandsaw, 9” Throat * R.O.C. Metal Cutting Bandsaw, s/n 9009060 * Cobrasaw
18” Vertical Bandsaw * 20’ Powered infeed conveyor * misc. outfeed conveyors *
Cincinnati Gilbert Horizontal Boring Mill, Table: 60” x 132”, Stroke -Long 108”, Cross 28.5”, Vertical 51”, Spindle:
6” with 36” stroke * Scharmann Horizontal Boring Mill Mod FB100 c/w Mititoyo NC Digital Readout, s/n 7364 *
WMW Union Horizontal Boring Mill Model BFT80, s/n 22995 c/w Tail Stock 80 x 120 x 60 * Masteel Horizontal
Boring Mill TPX6111C/3 Masteel NC controller, 110 mm Spindle dia., 48” x 44” bed S/NB40800015 *
Kingston Model HR3000 Gap Bed Engine Lathe, s/n 03690225, 30/38 x 120" C.C. * Kingston HL-2000 Gap Bed
Engine Lathe, 22/28 x 6’, * DMTG 560 x 3000 Gap Bed engine lathe, 22/28 x 10’ * Sirco PA36 Gap Bed Engine
Lathe, s/n 2870520, 32/48" x 120" C.C. 5 1/2" Bore * * ZMM Silven Mod CY630 Engine Lathe, s/n 28926 (1995)
4" Bore, c/w Taper Attachment, Quick Change * Colchester Mod600 Gap Bed Engine Lathe, s/n 8/0004/02319,
24/28 x 82"CC * Meuser Engine Lathe,16” x 80” s/n KM1-44836 * Summit Gap Bed Engine Lathe, s/n 3242598
20/28 x 60 C.C. Quick Change, c/w Tool Post, Taper Attachment, 4 & 3 Jaw Chucks & 4- 1/4" Bore * Celtic Mod17
Engine Lathe 16” x 80” no chuck centering tool post * ZMM Silven CU630 Gap Bed Engine Lathe, s/n 29569
(1997) 26/34 x 120", C.C c/w Taper Attachment, Quick Change, 4" Bore * Morando Mod PA25 Engine Lathe, s/n
41917, 24 x 60" C.C. (1964) * TOS Sn508 Gap Bed Engine Lathe, s/n 050200860975, 20 x 24 x 72" C.C., c/w
Taper Attachment, 2-3 Jaw/1-4 Jaw * Nardini Mod MS1440E Mascote Gap Bed Engine Lathe, s/n CHHMM55Z6,
14 x 18 x 36" C.C. 14 x 18 x 36" C.C. * Standard Modern Tool room Lathe Model LD 11” series 2000 * Mazak
Gap Bed Engine Lathe, s/n 20919, 22/28" x 96" C.C. * Geminis Mod GE-650 Gap Bed Engine Lathe, s/n
N3100HB450 4" Bore * Modern 560 (22”) X 2000 (6’6”) Engine Lathe * Modern 760 (30”) X 3000 (10’) Engine
Lathe * Gurutzpe Mod M2400 Engine Lathe, 5-1/4” bore, No Tailstock, 15’ Bed *
Gastolin Eutectic Eutronic GAP 3001 DC Mig Welder * Miller Dimension 400 Mig Welder c/w 2 Feeders, s/n
KE758576 * Lincoln RJR 500 Rectifier Welder, s/n 153795 * 6- Miller XMT 350 CC/CV Multi voltage welders *
4- Lincoln PowerMig 350 * Lincoln DC400 Mig Power Source with LN7 Feeder * 2- Lincoln CV400 Mig Power
Sources with LN7 Feeders * Plasma Cutting Systems * Lincoln Idealarc 300 Mig welder power source c/w feeders
* Canox C-MC-300VS with Wire Feeder * 2- Miller CP 200 with S-52-E Feeder * Lincoln CV 300 with LN7
Feeder * Hypertherm Max 200 Plasma Cutting System S/N 200-003583 * 4 Nederman Portable Smoke filters on
trolley carts *
Nakamura Tome TMC 30 CNC Turning Center, s/n A39003, c/w Fanuc 8-T Controller * Matsuura Model RA-11F
CNC Machining Center, s/n 940510966 c/w Yasnac Controller * Haas Model VF-2 CNC Turning Center, s/n 220
c/w Haas VF-2 Controller * Nakamura Tome Model TW-10 CNC Turning Center, s/n W200905 c/w Fanuc Series
16TT Controller * Nakamura Tome TW-20MM CNC Turning Center c/w Fanuc 16TTA Controller *
* WMW Radial Drill Press, s/n 2080, 12" Post, 48" Swing, 32" Rise * Elliot Surface Grinder c/w 8 x 20 Mag Chuck
* Buck & Hickman Vertical Slotter * Lapmaster Model 48 Lapping Machine, s/n 45017 * Mark Mod 1832 Surface
Grinder, s/n 806211, 18" x 32", Magnetic Chuck and Digital Readout * CSEPEL 6’ Radial Arm Drill, 18” Post, 5”6”
Under head, NOTE no main motor * Bertram Model M1506 Vertical Shaper 20” Diameter table * Cincinnati Radial
Drill Press, 8” post, 36” swing * TOA TRD1000F Radial Drill Press, 12" Post, 42" Rise, 48" Swing, s/n HSK-110 *
Cleveland Mod 24 Universal Milling Machine, s/n 2083, 12" x 48" Table, * WMW Heckert 48” Radial drill S/N
3608 *
High Pressure test pumps * Gas powered Contractor air compressors * 4 spool oil pumping system with explosion
proof pneumatic pumping * Approx 20 ton Hydraulic Shop Press * 20 H.P. Hydraulic power source for test bench *
Baileigh RMD Model M350 Hydraulic Cold Pipe Bender * Sunnen CAV31C Cylinder Hone, s/n ZJ1-1063, 48"
Stroke * MAKO by Compare modelAC04E3 High Pressure Air Compressor *
* Selleck 80 RT Forklift * Caterpillar R804WD 4 WD RT forklift, 4,000 lb 16’ Mast with Hydraulic forks and
sideshift * Powerboss Model S5/80-LD Sweeper, LPG Powered *
Goff Automatic Sandblast Cabinet with sand Silo, 36” high opening with 48” Diameter table * Storm King by
Waterblast Automatic Parts Washer, 34” x 16” High opening with 2 baskets *
Sweco BigMax™ GPY-512AR Gyratory Sifter, Description: The new SWECO BigMax™ Gyratory Sifter builds on
the unparalleled success of the GyraMax line of sifters. Known for their durability, reliability and accuracy of
separation, GyraMax sifters are used throughout the world to handle the most demanding screening applications
such as frac sand, resin coated sand, ceramic proppant, activated carbon, fertilizer, limestone, petroleum coke,
plastic pellets, PVC powder, roofing granules, salt, sugar, and more. With the BigMax™, SWECO adds high
capacity screening to the list of GyraMax features. The BigMax™ provides extremely high capacity in a very
compact, energy efficient footprint. Condition: Excellent Unused. Equipment Details: Motor: 10HP (7.5kW)General
Model Specifications: Drive: 10 HP (7.5kW), 1200 RPM, TEFC Motor, Located on side of sifter for ease of access,
Maintenance Free Single Sealed Bearing, Eliminates need for expensive transmissions or gearboxes, Grease-
Lubricated and Sealed, Zero Routine Maintenance,
Screens
Up To 100 TPH Capacity, Up To 360ft² (33m²) Of Screen Area with One Mesh, Two Mesh: Up To 240ft² (22m²),
Three Or Four Mesh: 120ft² (11m²), 12 Feet (3.7m) Long x 5 Feet (1.5m) Wide’ Provides Much Longer Retention
Time and More Accurate Separation’ Stainless Steel Woven Wire Screens, Manufactured by Sweco, One Piece
Hook Design, Tensioned in place for Long-term, High-efficiency Operation; Requires no time consuming clips,
Screens Can be Re-Tensioned, Uniform Gyratory Motion Throughout Whole Screen Area, 6 Deck Design, Mild
Steel Ball Deck below each Screen for Self-cleaning action, Heavy Gauge Perf Plate and Heavy Duty Rectangular
Steel Tubing, Synthetic Balls, Do Not have to be Removed when changing or inspecting Screens, Sectioned to
Allow for Removal When Needed, Quick Change Screen Design, Each Screen or Ball Deck can be independently
removed, Access From Either End of Sifter, No Need to Remove Dust Cover Or Ball Trays to change or inspect
screens, Screen Access Through 4 Hinged Doors at ends of Sifter’ Field Convertible Configuration Changes, Overs
and Unders from each deck can be independently sampled,
Other
Adjustable Stroke Drive Weight Assembly, Heavy Duty Tubular Support Stand, Can be Fed at single point or
independently to each deck , Screened Fractions from each deck can be combined or kept in separate outlets, High
Temperature tolerance (160°F) configurations available for operation at higher temperatures, Contact Parts
fabricated from AR steel than painted with industrial epoxy, Gaskets and Seals are Silicone, Deck Balls are EPDM,
Inspection Openings are 10 inch diameter Silicone
SIMULTANEOUS FARM AND ACREAGE
JOHN DEERE TR488 WORKSITE PRO TRENCHER,
Bobcat Model 15C auger c/w 6’ auger bit * SOLD SEPARATELY 28” auger bit and 12” auger bit
CATERPILAR 67” Skidsteer smooth bucket * 67” Skidsteer smooth bucket
PENALIFT 4,000 lb. Capacity platform lift c/w hydraulic power source
Cat Model TC40D LPG Forklift, Solid tire, 4,000 lb. Capacity, 10’ Lift, Propane fuel, Solid tire, S/N
56B08781 * Fenwick-Linde Electric Pallet lift, 1200 KG Capacity, 24 Volt, 10’6” lift, S/N 364-0-02-3-
040-12 *
Fruehauf 27’ T/A Pup Van Trailer for storage, N.V.S.N. has electric tailgate
John Deere Gator, Model TH 6X4, S/N W06X4HD003767
Polaris Xpedition 325 Quad S/N 1XACK32A84B394909 * HONDA TRX250 QUAD S/N
1HFTE216194900091 * POLARIS SPORTSMAN 400 QUAD (BURNT PARTS ONLY) S/N
4XAMN50A48A500507 * 3 KIDS ELECTRIC CARS *
GRASSHOPPER MODEL 1820 zero turn lawnmower, 66” deck * JOHN DEERE SABRE 17 HP ride on
lawnmower, 17 H.P., 42” deck * JOHN DEERE LA150 ride on lawnmower 26 H.P., 54” DECK * JOHN
DEERE 111 ride on lawnmower 11 H.P. 36” deck * JOHN DEERE 13 H.P. ride on lawnmower, 38” deck,
no hood
TORO MODEL 724 OE-3770 9 H.P., 205 CC, 24: SNOWBLOWER, ELECTRIC START,
TORO MODEL 724 OE-3770 9 H.P., 205 CC, 24: SNOWBLOWER, ELECTRIC START
16’ T/A equipment (SKIDSTEER) Trailer, pintle hitch , 3500 lb. axles, Beaver tail and folding loading
ramps, N.V.S.N. * 20’ S/A DUAL 20” wheel utility trailer, N.V.S.N. *
S/A utility trailer 12’ deck with folding loading ramp, S/N 2AT9100759M303646 * 10’ deck double wide
sled trailer with storage box on front 7’6” wide N.V.S.N. * 20’ deck T/A double wide 4 place sled trailer,
N.V.S.N. * 10’ deck utility trailer with sides, N.V.S.N. * 8’ deck S/A utility trailer with sides, N.V.S.N. *
6’ X 5’ S/A utility box trailer N.V.S.N. * 6’6” X 42” S/A utility box trailer, N.V.S.N. *
Terms and Conditions
TERMS & CONDITIONS FOR FOOTHILLS EQUIPMENT LIQUIDATION CO. LTD.
TIMED ONLINE MACHINE & FABRICATING AUCTION. BIDDING STARTS ON TUESDAY, NOVEMBER 28 & STARTS CLOSING AT 9 A.M. MST. ON TUESDAY, DECEMBER 5, 2023.
TERMS & CONDITIONS FOR ON-LINE BIDDER:
CUTOFF FOR ONLINE BIDDER REGISTRATION IS MONDAY, DEC 4, 2023, 3 P.M.
CDN. DOLLARS (CAD) SETTLEMENT MUST BE MADE BY 4 P.M. ON THE DAY FOLLOWING THE AUCTION.
Subject to additions and deletions prior to the sale and at the time of the auction. All bidders participating in the auction shall be bound by the following terms & conditions.
1. Auction to be conducted in English & in Canadian Dollars (CAD).
1(a) Payment or guaranteed settlement must be made immediately at the conclusion of the auction.
2. Foothills requires guaranteed payment which must be provided by the purchaser by means of the following: 2a, 2b or certified funds given as a deposit in trust.
2(a) Bidders must provide a valid credit card number to register. A $1, OOO pre-authorized hold may be placed on this credit card prior to the sale and anytime up to sale time. Bidders will be refunded within 3 – 5 days if no purchases are made.
2(b) A pre-authorized hold may be placed on the credit card provided for 25% of the amount of any purchases immediately on the drop of the hammer. This deposit is non-refundable unless certified funds are given. Payment in full is expected by 4 p.m. the day following the sale.
2(c) Foothills may and will charge the credit card left at the point of registration for any and all auction purchases if another method of payment is not arranged within 24 hours prior to the auction ending
3. Foothills Equipment Liquidation Co. Ltd. "Foothills" reserves the right to accept or reject a Bidders registration, and those with incomplete information, invalid credit card, or insufficient funds to complete a hold, as described in paragraph 2. To avoid delays in the registration approval process, please check accuracy of all information provided. If your anticipated purchases are going to be over $10,000 a guarantee of payment must be provided at the time of registration. Failure to comply allows Foothills to reject any bid.
4. Foothills accept the following methods of payment: Visa, Mastercard to $3,000 with no credit card fees, 3% over $3,000. Wire Transfer & Bank Drafts in Canadian Dollars (CAD)
5. Each successful online bidder will receive confirmation at the beginning of the next business day either by phone or by email. All purchases must be settled in full by 4 p.m. on the day following the sale. Foothills will make one attempt at phoning all winning bidders with the final invoice total and to confirm the method of payment. If we are unable to contact you, purchases will be charged to the credit card as provided. Otherwise, payment arrangements can be made by calling 780-922-6090 with your Bidder # as reference.
6. BUYERS MUST ARRANGE ALL SHIPPING AT THEIR OWN EXPENSE. All articles purchased shall be removed by the Purchaser. Purchaser is responsible for all removal, dismantling, crating, shipping and related costs, as well as the arrangement of the shipping company. No exceptions will be made whatsoever. Articles left behind immediately after the auction and thereafter will be at the winning bidders own risk. Foothills will not be held responsible for any items damaged, stolen, missing, or left behind. Please make all necessary arrangements to have your items removed as soon as possible. Small items must be removed immediately.
7. PLEASE SEE ATTACHED REMOVAL SCHEDULE.
8. A 15% buyer's premium will apply on all purchases made by internet bidding.
9. A 5% GST applies to all purchases in Canada. Any exempt buyers can apply to CRA for a refund
10. Terms and conditions are subject to amendments and modifications announced by the auctioneer at the time of the auction. Sale is subject to additions & deletions, and may include items from other consignors and/or situations.
11. All items are sold "AS IS, WHERE IS" with no warranties expressed or implied.
12. The Auction Company reserves the right to accept or reject bids, and to resolve any disputes or discrepancies at its discretion. The Auctioneers or Auction Companies decision shall be final.
13. All descriptions & photos provided by the catalog listing are for informational purposes only and in no way a representation or guaranteed implied or given.
14. If for any reason the auction company’s ability to turnover clear title and unrestricted removal becomes an issue the auction company is liable only to refund the hammer price, buyer’s premium and taxes paid.