PHONE: 780-922-6090   FAX: 780-922-6248   bneal2@telus.net   22355C Wye Road, Sherwood Park, Alberta, Canada T8C-1H7

HOME   |   UPCOMING AUCTIONS   |   CURRENT LIQUIDATIONS   |   ABSENTEE BIDS   |   CONSIGNING   |   BIDDING   |   CONTACT   |  

 

 

 

Precision Steel & Manufacturing LTD.

Date: Tuesday September 11th, 2018
10am

Site: 233 - 116 Avenue
Edmonton, AB

Preview: Monday September 10th, 2018
11am to 5pm

 

 

Cutting Table Technical Information

 

link to printable steel list

 

 

FEATURING (updated August 16, 2018)

STEEL INVENTORY: APPROXIMATELY 300,000 LBS OF HR & CR PLATE, I-BEAM, CHANNEL, ANGLE, TUBING, PIPE, ROUND AND SQUARE ROD

* SOME STAINLESS, BAR GRATE AND MORE

* STEEL WORK PLATFORMS WITH 1 PLATE TOPS UP TO 40 FEET LONG

CRANES:GROVE RT980 ROUGH TERRAIN CRANE, 80 TON CAPACITY, 36 MIN HEIGHT AT MAX RAISE ANGLE, 148 MAX HEIGHT AT MAX RAISE ANGLE WITHOUT JIB, 4 SECTION BOOM, 6 SHEAVE BLOCK, SWING AWAY JIB (NOT INSTALLED), DETROIT 6-71T DIESEL, 5469 HOURS, CURRENT INSPECTION, S/N 40000

* GROVE RT500C ROUGH TERRAIN CRANE, 25 TON CAPACITY, 28 MIN HEIGHT AT MAX RAISE ANGLE, 70 MAX HEIGHT AT MAX RAISE ANGLE, 3 SECTION BOOM, 4 SHEAVE BLOCK, SWING AWAY JIB (NOT INSTALLED), CUMMINS ENGINE, 5306 HOURS, CURRENT INSPECTION, S/N 84991

* GROVE RT58E ROUGH TERRAIN CRANE, 22 TON CAPACITY, 25 MIN HEIGHT AT MAX RAISE ANGLE, 60 MAX HEIGHT AT MAX RAISE ANGLE (WITHOUT JIB, 3 SECTION MAST, SWING UNDER JIB (NOT INSTALLED), CUMMINS DIESEL, 9100 HOURS, CURRENT CERTIFICATION, S/N 73872

*

FORKLIFTS AND MANLIFTS: CAT P33000 DIESEL FORKLIFT, 29800# LIFT CAP., HYDRAULIC FORKS, SIDE SHIFT, 197 LIFT HEIGHT, 12:00 X 20 DUAL DRIVERS, 12:00 X 20 STEERING 8394 HOURS ON METER, S/N T39A-10317

* HYSTER H280HD DIESEL FORLIFT, 28,000# LIFT CAP., HYDRAULIC FORKS, SIDE SHIFT, 148 LIFT HEIGHT, 10:00 X 20 DUAL DRIVERS, 10:00 X 20 STEERING, 13,865 HOURS ON METER

* CAT DP50K DIESEL FORKLIFT, 9,000# LIFT CAP., HYDRAULIC FORKS, SIDESHIFT, 189 LIFT HEIGHT, 8:25 X 15 DUAL DRIVERS, 7:00 X 12 STEERING,  5667 HOURS ON METER, S/N AT28B60434

* JLG MODEL 450 AJ  MANLIFT, 5372 HOURS, S/N 0300059961

* JLG SERIES II MANLIFT, 5662 HOURS (ENGINE NEEDS TIMING BELT), S/N 030009189

PLASMA CUTTING SYSTEM:  MESSER TITAN CNC PLASMA CUTTING SYSTEM MODEL TITAN 10/4P-02-4121, 10 X 44 TABLE WITH ALL NEW SLATS, 2002 UNIT  COMPLETELY RETROFITTED IN 2014 TO HYPERTHERM HPRXD POWER SOURCE S/N HPR400-002458 WITH HYPERTHERM COOLING SYSTEM MODEL 078531 AND MESSER 8 CARTRIDGE VACUUM HOUSE AND CONTROLS, COMPUTERS WITH SOFTWARE LOADED (LICENSING IS THE PURCHASERS RESPONSIBILITY)

* HYPERTHERM HT4400 PLASMA CUTTING SYSTEM WITH HYPERTHERM COOLING SYSTEM

* HYPERTHERM 200 CART MOUNTED PLASMA CUTTING SYSTEM

* HYPERTHERN 105 POWERMAX AND 75 PLASMA CUTTING SYSTEM 8

FABRICATING: HYD-MECH M-20A N.C. BANDSAW

* 2- SAFEHOLD 10,000 LB LIFTING MAGNETS

* POWERED CONVEYORS IN AND OUT FEED

* PEDDINGHAUS 110/140 IRON WORKER, 6 X ANGLE CAP., 12 X 7/8 BAR CAP., S/N 42381470100032

* OLIVER 510 DRILL SHARPENER

* ARCHDALE 6 RADIAL ARM DRILL, 64 UNDER ARM, 40 LIFT, 16 POST

* ARCHDALE 5 RADIAL ARM DRILL, 56 UNDER ARM, 30 LIFT, 14 POST

* FORCE JZB-25 AUTO FEED DRILL PRESS

*  FORCE LG-25 DRILL PRESS

* DRILL BITS IN PRISTENE CONDITION TO 3

* LARGE QUANTITY OF DIES FOR IRON WORKER WITH HEAD FOR LARGE HOLES

*

SUB ARC: LINCOLN TRACER SUB ARC WITH LT-7 TRACTOR AND LINCOLN DC- WELD POWER SOURCE

WELDERS: 2- MILLER BIG BLUE 402P 400 AMP DIESEL WELDERS, MOUNTED ON SKID FOR CRANE OR FORKLIFT HANDLING, 1- 7483 HRS, 1- 7941 HRS

* 14- LINCOLN FLEXTEC 450 DIGITAL INVERTER WELDERS WITH LF-72 WIRE FEEDERS

* 8- LINCOLN IDEALARC RSR-400 RECTIFIER WELDERS

* 2- LINCOLN DC600 WELD POWER SOURCES

* 2- LINCOLN IDEAL ARC R3R-500 RECTIFIER WELDERS

* 6- LINCOLN CV 300 MIG WELD POWER SOURCE WITH LN-7 WIRE FEEDERS

* 2- MILLER DIMENSION 452 WELDERS

* PROWELD ARC-1850 STUD WELDER

* 2- PROWELD ARC-1200 STUD WELDER

*

STRUCTURES: 40 SKIDDED OFFICE / LUNCH ROOM SHACK

AIR COMPRESSORS: 2017 DV SYSTEMS G30 ROTARY SCREW AIR COMPRESSOR WITH DV PRO DRY AIR DRYER COOLER

* SULLAIR 750 DIESEL AIR COMPRESSOR, CAT DIESEL, 750 C.F.M., TRAILER MOUNTED, 2731 HOURS, S/N 114824

*

SANDBLASTING & PAINT: 2-CLEMCO CLASSIC 150 SANDBLAST POTS C/W HOSES AND GUNS, 1-2004, 1-2010

* SAND SILO APPROX. 25 CUBIC METRES

* GRACO AIRLESS SPRAY SYSTEM

 WELDING EQUIPMENT: 2 SETS 2012 IRIZAR SAR-80 PIPE ROLLS, 850 5000 mm, LOADING CAPACITY 40 TON, ROTATION CAPACITY 80 TON, 500mm WHEEL, ROTATION 100 1OOO mm/MIN, S/N 356103 & 356104

* APPROX. 36 SETS OF H.D. STEEL PIPE STANDS TO 8

* GULLCO 350 ROD OVEN

* 4- VICTOR RADIAGRAPH, 200 FEET OF TRACK

*

MISCELLANEOUS: 50 TON MACHINE SKATES

* 4530 LITRE DOUBLE WALLED DIESEL TANK, SKID MOUNTED, WITH METER

* MAGNUM VLT4060 LIGHT TOWER, 1073 HOURS, S/N 046956

* PLATE CLAMPS TO 3

* MAGNETIC DRILLS AND MILLS

* LIFTING MAGNETS

* 4- 9-10,000 LB. COUNTER WEIGHTS & 1- 4,100 LB.

* HOTSY ELETRIC STEAMER/WASHER, DIESEL FIRED HEATER

* APPROX. 50 TON HYDRAULIC PRESS

* 15 OXY/ACCET BOTTLE RACKS WITH TORCHES AND GAUGES

* SKIDDED STEEL SHACK FOR BOTTLE STORAGE

* 3- FLAGRO FVP-400 390,000 BTU  PROPANE CONSTRUCTION HEATERS, STEEL PLATE AND STRUCTURAL RACKS

* 1 TON ELECTRIC CHAIN HOISTS

* SPREADER BARS

* COM-A-LONGS

* NUMEROUS HAND AND POWER TOOLS

*

TRACTOR, TRAILER, PICK-UPS: 2013 JOHN DEERE 3520 ACREAGE TRACTOR, HEATED CAB, JD 300 CX FRONT-END LOADER, 647 HOURS

* 2012 KOMFORT KING MODEL 2955 BUMPER PULL HOLIDAY TRAILER, 3 SLIDE-OUTS, POP UP TV, POWER FRONT JACK, POWER STABILISERS, LEATHER ENTERTAINMENT SEATING

* 2012 DODGE 2500 4X4, CREWCAB PICK-UP, LONG BOX, 5.7 LITRE GAS, 205,000 km

* 2006 CHEV 2500 CREWCAB 4X4, SHORT BOX, 315, 000 km

* 2004 CHEV 1500 EXTENDED CAB 4X4, SHORT BOX, 180,000 km

*

 

 

*

THIS IS A BIDSPOTTER ON-LINE AND

SIMULTANEOUS LIVE AUCTION

 

 

 

 

 
 

 

_____________________________________________________________________________________